Features:
-
Motor for Low Speed High Torque Application:
- Low speed and variable speed feature.
- Ideal for low speed rotisserie applications.
- Set up bearings to hold the meat's weight, minimizing axial and radial loads on the motor.
- Use flexible couplings for direct-drive setup.
- Place the motor away from high temperatures to prevent mechanical or electrical failures.
- Consider a firewall to protect the motor.
- Tested with 50kg (110lb) weight, simulating a hog/pig in an outdoor BBQ rotisserie setup.
-
Motor Specifications:
- Compact, single-phase, 115v AC to 230v AC input.
- Permanent magnet, brushless gear motor with reversible, on/off, speed adjustable controls.
- Speed range varies with shaft load; maximum speed is 10 RPM.
- Rotation is reversible via a signal wire.
-
Brushless 12VDC Gear Motor:
- 24 N-m (17.7 ft-lb) torque at 10 RPM.
- Permanent magnet rotor.
- Dimensions: 60mm x 60mm square motor, 56mm diameter gear box.
- 4 M5 threaded holes for face mounting.
- Motor length: 6.75 inches (171mm); integrated controller.
- Shaft: 12mm diameter with flat, 1 inch (25.4mm) long.
- Control line (speed adjustment, reversing signal, on/off signal, signal ground): 14 inches (356mm) long.
- Connector line to power adapter: 14 inches (356mm) long.
- Simple motor control:Turn motor on by disconnecting the on/off (blue) wire from the signal ground (black) wire.
- Introduce a switch between the on/off wire and the ground wire.
- Reverse rotation by connecting the reverse (white) wire to the ground wire (ensure motor is at full stop before reversing).
- Vary speed by turning the potentiometer.
- Power Adapter:
- Power cord: 5 ft (152 cm) long with standard plug for appliance outlet.
- Universally accepts 115v AC or 230v AC.
- Connector line to motor: 3 ft (91 cm) long.
- Dimensions: 2.5 in (64mm) width, 4.75 in (121mm) length, 1.75 in (44mm) depth.
Here's an example of a weld turntable application using this motor.
Below are videos of some other applications:
Note: The above setup has a support bearing so there is not weight on the shaft of the motor itself.
2 Reviews Hide Reviews Show Reviews
-
PN00211 - 10 RPM (ROTISSERIE) GEAR MOTOR 12V BRUSHLESS DC (BLDC) 115V 230V REVERSIBLE VARIABLE SPEED
Works Great! easy to set up. I am able to get consistent low RPMs for long periods of time with great torque. Very Happy.
-
10 rpm gear motor
This motor is the slow speed drive for my portable Rose Engine Lathe. I am very pleased with how it works and highly recommend it!
