PN00111 - Momentary Switch Option 12v dc 50 RPM gear motor with wireless remote control

$94.00
(2 reviews) Write a Review
SKU:
PN00111
Shipping:
Calculated at Checkout
Adding to cart… The item has been added

WARNING:  PLEASE DO NOT RUN THIS REMOTE CONTROL WITH A VOLTAGE GREATER THAN 13VDC.  DO SO WILL PERMANENTLY DAMAGE THE RECEIVER BOARD.

Drawing of the motor is HERE.

The gear motor is measured to be 7 inch long and the motor itself has a diameter of 2.5 inches. Rated voltage of this gear motor is 13.5 VDC and maximum speed is 50 RPM.  Rated output load is 60 watts and output toruqe at 50 RPM is 6 N-m (4.4 ft-lb).  Mounting is based on M6 screw mounting.

The wireless controller functions as a reversible momentary control switch from a 11-14v dc power source. By holding down the right side button, the motor runs in one direction until the user releases the button; by holding down the left side button, the motor runs in the opposite direction until the user releases the button. Current rating is 6 amps.  Two transmitters (with batteries) are included in this package.  Wireless signal range is 100 ft.

If you know your application requires a high current draw, secondary (high-load) relays are required to make it work.  Here's a diagram that uses automotive relays to achieve that:

Using secondary relays for high-load applications

2 Reviews Hide Reviews Show Reviews

  • 5
    Gear motor and wireless remotes for prototype

    Posted by Ron Shepherd on May 31st 2021

    Product is excellent very powerful wiring was easy and simple with supplied schematics excellent product very pleased

  • 5
    Great Motor

    Posted by David A Tamm on Oct 9th 2020

    Used to control my Cooloroo 120" blinds in carport and outside man cave. More then enough power to raise and lower them. Plus the working distance is great!