USBATOMB - One Meter Long USB Cable Type A to Micro B

Name: USBATOMB - One Meter Long USB Cable Type A to Micro B
Brand: Makermotor
SKU: USBATOMB
Price: 1.48 USD
Availability: InStock

Makermotor

$1.48

(No reviews yet) Write a Review

SKU:: USBATOMB
UPC:
Shipping:: Calculated at Checkout

Current Stock:

Quantity:

Adding to cart… The item has been added

Description

USB cable from type A to micro B. Length is 1 meter (39") long.

Related Products
Customers Also Viewed

20k ohm potentiometer with male jumper wires

Makermotor

20KPOT - Potentiometer 20k Ohm with Male Jumper Wires

$3.00

Cytron

PN00218-CYT16 Maker Nano Microcontroller Arduino IDE Compatible ATmega328P

$8.90

Cytron

PN00218-CYT17 Maker Nano Pi RP2040 Microcontroller Arduino IDE MicroPython CircuitPython

$9.90

PN01007-38 3/8" Shaft Electric Gear Motor 12v Low Speed 50 RPM Gearmotor DC

Makermotor

PN01007-38 - 3/8" D Shaft Electric Gear Motor 12v Low Speed 50 RPM Gearmotor DC

$71.00

The wireless controller functions as a reversible momentary control switch from a 12v dc power
source. By holding down the right side button, the motor runs in one direction until the user releases
the button; by holding down the left side button, the motor runs in the opposite direction until the user
releases the button. Current rating is 3 amps. Two transmitters (with batteries) are included in this
package. Wireless signal range is 100 ft.

Makermotor

MOM-RC - Wireless Momentary Remote Control Switch 12vdc

$30.00

Cytron

PN00218-CYT8 Microcontroller CT-UNO Arduino IDE Compatible ATmega328

$14.70

This bracket is designed to fit PN01007 and PN01107 series. Screws are included.

Makermotor

BRACKET - Bracket for PN01007 and PN01107 Series Made in USA

$10.00

PN00409-38 VARIABLE SPEED GEAR MOTOR 12VDC 50 RPM

Makermotor

PN00409 - 12v Gear Motor PWM Variable Speed 12vdc Gearmotor

$106.00

Makermotor

PS12V17A - 12v dc Regulated Switching Power Supply 17A with ON/OFF switch

$56.00

This switch can be used for a 12v DC or a 24v DC brushed motor. The switch is a DPDT so it functions as a reverse
polarity switch on the motor. By reversing polarity on a brushed 12/24v dc motor, the motor will reverse and forward
accordingly. Center position of the switch is OFF.

Makermotor

SWDPDT10A - Latch Action Pre-wired DPDT Switch for Reverse Forward Functions

$10.00

Makermotor

PWM12V10A - 12V DC PWM Speed Controller Reverse Polarity Protected 10A

$35.00

PN01007 Electric Gear Motor 12v Low Speed 50 RPM Gearmotor DC

Makermotor

PN01007 - 10mm 2-flat Shaft Electric Gear Motor 12v Low Speed 50 RPM Gearmotor DC

$71.00

Cytron

PN00218-CYT13 25Amp 7V-58V High Voltage DC Motor Driver Speed Controller MD25HV

$59.00