USB Type A to Micro B

USBA2MB - One Meter Long USB Cable Type A to Micro B

Makermotor

$1.25

(No reviews yet) Write a Review

SKU:: USBA2MB
UPC:
Shipping:: Calculated at Checkout

Description

USB cable from type A to micro B. Length is 1 meter (39") long.

Related Products
Customers Also Viewed

Arduino compatible board with micro B

Cytron

PN00218-CYT8 Microcontroller CT-UNO Arduino IDE Compatible ATmega328

$14.70

PN00218-CYT9 Dual-Channel 10A Motor Control Driver + Arduino IDE Compatible ATmega328 Microcontroller + Sensor Interfaces All-in-one Sumo Robot Board URC10

Cytron

PN00218-CYT9 Dual-Channel 10A Motor Control Driver + Arduino IDE Compatible ATmega328 Microcontroller + Sensor Interfaces All-in-one Sumo Robot Board URC10

$33.75

Arduino compatible board with a screw terminal shield and a usb cable.

Cytron

PN00218-CYT8KIT - Arduino IDE Compatible ATmega328 Microcontroller Board with a Screw Terminal Prototyping Shield

$23.45

Arduino IDE compatible motor driver kit

Cytron

PN00218-CYT8KIT2 - Arduino IDE Compatible ATmega328 Microcontroller Board with 10A Motor Control Driver Shield and USB Cable

$28.95

PN01007-38 3/8" Shaft Electric Gear Motor 12v Low Speed 50 RPM Gearmotor DC

Makermotor

PN01007-38 - 3/8" D Shaft Electric Gear Motor 12v Low Speed 50 RPM Gearmotor DC

$64.00

This bracket is designed to fit PN01007 and PN01107 series. Screws are included.

Makermotor

BRACKET - Bracket for PN01007 and PN01107 Series Made in USA

$10.00

PN00409-38 VARIABLE SPEED GEAR MOTOR 12VDC 50 RPM

Makermotor

PN00409 - 12v Gear Motor PWM Variable Speed 12vdc Gearmotor

$99.00

The wireless controller functions as a reversible momentary control switch from a 12v dc power
source. By holding down the right side button, the motor runs in one direction until the user releases
the button; by holding down the left side button, the motor runs in the opposite direction until the user
releases the button. Current rating is 3 amps. Two transmitters (with batteries) are included in this
package. Wireless signal range is 100 ft.

Makermotor

MOM-RC - Wireless Momentary Remote Control Switch 12vdc

$30.00

Makermotor

PS12V17A - 12v dc Regulated Switching Power Supply 17A with ON/OFF switch

$56.00

PN00218-CYT9 Dual-Channel 10A Motor Control Driver + Arduino IDE Compatible ATmega328 Microcontroller + Sensor Interfaces All-in-one Sumo Robot Board URC10

Cytron

PN00218-CYT9 Dual-Channel 10A Motor Control Driver + Arduino IDE Compatible ATmega328 Microcontroller + Sensor Interfaces All-in-one Sumo Robot Board URC10

$33.75

This switch can be used for a 12v DC or a 24v DC brushed motor. The switch is a DPDT so it functions as a reverse
polarity switch on the motor. By reversing polarity on a brushed 12/24v dc motor, the motor will reverse and forward
accordingly. Center position of the switch is OFF.

Makermotor

SWDPDT10A - Pre-wired DPDT Switch for Reverse Forward Functions

$10.00

Arduino compatible board with micro B

Cytron

PN00218-CYT8 Microcontroller CT-UNO Arduino IDE Compatible ATmega328

$14.70

PN01007 Electric Gear Motor 12v Low Speed 50 RPM Gearmotor DC

Makermotor

PN01007 - 10mm 2-flat Shaft Electric Gear Motor 12v Low Speed 50 RPM Gearmotor DC

$64.00

md25hv motor driver/controller

Cytron

PN00218-CYT13 25Amp 7V-58V High Voltage DC Motor Driver Speed Controller MD25HV

$49.00