PN01107 - 10mm 2-flat Shaft Electric Gear Motor 24v Low Speed 50 RPM Gearmotor DC

Features:

• Rated Voltage:  27 VDC
• Rated Speed:  50 RPM
• Rated Current: 3A
• Rated Torque:  6 N-m (4.4 ft-lb)
• Mounting:  M6 screw holes
• Shaft:  10mm shaft with 2 flats where flat to flat is 6.6mm and threaded end to fit a M6 tightening nut.

Note on self-locking: This motor uses a worm gear drive, which provides a strong tendency to self-lock (the output shaft resists being back-driven) due to the high gear ratio and worm pitch. This is a gear-design characteristic, not a mechanical brake — the holding force is limited and is not a substitute for a brake in safety-critical or high-load hold-in-place applications.

Documents:

• Drawing of the motor is HERE.
• 3D model can be obtained HERE.
• Torque Curve