PN00113-6-VAR - High Torque 6 RPM Conveyor and Rotisserie Gear Motor 12V DC Reversible Variable Speed


(1 review) Write a Review
Calculated at Checkout
  • This coupling is designed for PN00113 so all the user has to do is to drill a straight 
pin hole, slightly larger than 0.25" (6.35mm), across either a shaft, a bar, or a pipe. 
A 0.25" diameter, quick-release pin is designed to easily secure the shaft/bar/tube. 
The coupling is designed to fit either a 1" OD structural tube, 1" diameter shaft, 
7/8" hexagonal bar, or 25mm OD shaft or pipe.
  • This brand new 12vdc power supply is able to output 17 amps of current continuously, perfect for 
running a project that requires a 12vdc input.  A convenient ON/OFF switch is located at the plug end 
of the power cord.  This power supply is RU (UL Recognized Components) Certified.

This unit accepts either 115vac or 230vac.  Dimensions of this unit are 9"x 5" x 1.5".

This is NOT a surplus or liquidated item.
  • Power Supply Plus Coupling Combo
Adding to cart… The item has been added

A pre-wired DPDT reverse switch part number SWDPDT10A is included with this motor.

Drawing of this motor is available HERE.

Due to its low speed and 12vdc features, this motor is ideal for a mobile rotisserie application.  Other applications include display turntable, conveyor system, sign display, motorized fishing reel, and more.

12VDC Gear Motor:  21 N-m (15.5 ft-lb) torque at 6 RPM.  Permanent magnet stator.  Overall envelope dimensions are 8 inches by 8 inches by 5 inches.  Shaft dimensions are 15mm diameter by 50mm (2.0 inches) of length.  The shaft is a D-shaft (shaft with a flat).  Motor control is very simple.  A center-off DPDT switch is included so the user simply leave the toggle at its center position for off, flip the toggle to one side for forward, and flip the toggle to other side for reverse.  Keep in mind the torque will reduce when speed is lowered by the speed controller.  

The 12V DC PWM controller features a 5 inches(12.7 cm) long connection to its potentiometer.  The potentiometer has a on/off switch built-in with a knob.  An overload protection is set at 10 amps of current so the controller will shut down when such a current occurs.  The distance of the connection wires between the motor and the controller is 10 inches(25.4 cm). The distance of the 12v connection wire is 46 in(116.8 cm) long.  The unit features reverse polarity protection and current handling up to 10A.  Housing is extruded aluminum.

1 Review Hide Reviews Show Reviews

  • 5

    Posted by Juan Almeda on Nov 18th 2019

    Nice, set up and excellent quality of work on the wires. The motor was on for about 5 to 6 hours and no problem managing the load on the pit.