PN01007-38 - 3/8" D Shaft Electric Gear Motor 12v Low Speed 50 RPM Gearmotor DC

It has come to our attention that there are certain listings available on the internet that depict a product that closely resembles our PN01007-38. These listings may use the same part number with the intention of misleading our customers. Although the appearance of the motor may be similar to our PN01007-38, it has no affiliation with our original product. To distinguish the original PN01007-38, please look for the Makermotor logo on the product.

Looking for a powerful, reversible DC motor with plenty of torque? Look no further than our PN01007-38 motor. With a rated torque of 6N-m (4.4 ft-lb) and a rated load of 60 Watts, this motor is perfect for a wide range of applications. It features M6 screw holes for easy mounting and a 3/8" shaft with a 1 flat ("D" shaft) where flat to OD is 0.322" and the length of the shaft is 0.886" long. Whether you're building a robot, a motorized tool, or anything in between, our reversible DC motor is up to the task.

This reversible (by reverse polarity) motor is simple to use and output plenty of torque for many applications.

Features:

• Rated Voltage:  13.5 VDC
• Rated Current:  6A
• Speed:  50 RPM
• Rated Torque:  6 N-m (4.4 ft-lb)
• Mounting:  M6 screw holes
• Shaft:  3/8" shaft with 1 flat ("D" shaft) where flat to OD is 0.322" and the length of the shaft is 0.886" long.

Documents:

• Drawing of the motor is HERE.
• 3D model can be obtained HERE.
• Torque Curve.